welcome to the official website of hongrun tong!
Installation method for hair removal machine
Nov 28,2024
The hair removal machine is mainly used for the depilation of poultry. It is mainly divided into poultry depilation machines, animal depilation machines, large depilation machines, and small depilation machines. To help everyone better understand the hair removal machine, here is an introduction to the installation method of the hair removal machine:
(1) First, arrange the position of the hair removal machine. The position requirements are: convenient for drainage, water supply, power connection, and conducive to the operation of the next process.
(2) Since some models of chain covers and motor covers are packaged separately during transportation, the chain cover and motor cover should be tightened with screws first to protect the machine's chain and motor.
(3) Find an electrician to install the grounding wire, leakage switch, and main switch of the machine, and connect the motor as the power source. The power box should be more than 1.4 meters above the ground.
(4) Supply water to the soft pipe on the iron pipe sleeve on the left middle side of the top of the machine, and install a water switch in front of the soft pipe for easy control.
(5) Brake the first two rollers at the bottom to ensure that the hair removal machine does not move during operation.
(6) After completing the above steps, the hair removal machine is basically installed. Turn on the power to check whether the machine operates normally.
The above is the specific installation method of the hair removal machine, and I hope it will be helpful to everyone. If you are interested in our products, please feel free to call for consultation or order!
Contact Information
online message
If you have any questions, you can leave us a message at any time.